Extraction archivos - Gases Solutions - Gases Industriales

ASPIRADOR DE HUMO EVO 2.1 RE – 230V + BRAZO 3m

admin — Mon, 10 Feb 2025 20:01:35 +0000

Filter replacement varies according to the use and frequency of use of the machine.
The clogging/build up of dirt on the filters may vary according to :
• Welding material (every material generates different fumes/powder)
• Welding type (each process such as MIG, TIG, electrode, etc….)
• Elements in contact (for example oil, grease, paint, etc. which generate more «agressive» fumes).A
To replace the filters, a triangle key (FIG II) is necessary. This key is supplied with the machine, which opens the filters’ inspection panels.
Opening that panel allows direct access to the filter section. Removing the filters is done by pulling them one by one towards the outside.
Note that the filtering section may be difficult to remove due to the seals which are set up around the filters. These hermetic seals (which are pressurised) guarantee the optimal filtering of the extracted particules.
Removing the filters must be done in the following order, starting with the lowest filter; which has a frame that can be used as a bearing point

La entrada ASPIRADOR DE HUMO EVO 2.1 RE – 230V + BRAZO 3m se publicó primero en Gases Solutions - Gases Industriales.

ASPIRADOR DE HUMO UNI 2.0 RE – 400V + BRAZO 3m

admin — Mon, 10 Feb 2025 20:00:54 +0000

Thank you for your choice! In order to get the most from this product, please read the following instructions with care:
The UNI 2.0 fume extractor is ideal for extracting and filtering welding fumes.
The welding gas and fumes are extracted to prevent any pollution in the workspace. The extracted air that contains gas and fumes is filtered and recycled in the work area. This device is designed to extract and purify the dry fumes generated by spot, MMA, or MIG welding. These dry fumes generate polluting substances that contain gas or welding slag residues.
The machine also purifies the work environment, the extractor renews the air inside the work area, reducing the ambient air pollution.
To comply with regulations and filtration quality to the operator’s safety, it is important to maintain and replace the filters in accordance with the recommendations (see. page -10 filter replacement).

La entrada ASPIRADOR DE HUMO UNI 2.0 RE – 400V + BRAZO 3m se publicó primero en Gases Solutions - Gases Industriales.

ASPIRADOR DE HUMO DE SOLDADURA BINZEL FEC PARA ANTORCHA ASPIRANTE

admin — Mon, 10 Feb 2025 20:00:45 +0000

The FEC fume extraction system is used in industry and in the trade for the extraction of welding fume. It is available with connection voltages of 115 V and 230 V. These operating instructions only describe the FEC. The FEC fume extraction system may be operated only with original ABICOR BINZEL spare parts.

La entrada ASPIRADOR DE HUMO DE SOLDADURA BINZEL FEC PARA ANTORCHA ASPIRANTE se publicó primero en Gases Solutions - Gases Industriales.